Addonics RT5835HEU3 Guide de l'utilisateur télécharger pdf (Page 2)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Removing Cover of Raid Tower V

Loosen the 3 screws at the back of the tower using a Philips screwdriver. Push cover

toward the rear of the tower and lift slightly to disengage and remove.

Arrays

The RT5835HEU3 contains two individual Port

Multipliers, each managing an array of four

drives. Array 1 includes the four drives on the

left of the Disk Array 5SA, and Array 2 includes

the far right drive on Disk Array 5SA, along with

all drives in Disk Array 3SA as shown.

Array Host LED: Glows when either eSATA or

USB connection is active. Winks to indicate

activity.

Array Error LED: In RAID configuration, glows

to indicate a RAID array is degraded or offline.

Blinks to indicate a RAID array is in a rebuilding

state.

Connecting and Powering on

RAID Tower V

1. Connect AC Power cord on the rear of the

tower.

2. Connect each of the two Arrays to the

computer using either eSATA or USB 2.0 or

USB 3.0 cable.

3. Turn on Main AC Switch on the rear of the

tower, then press Front Power Switch to turn

unit on.

Array 1

Array 2

Front

Power Switch

Power LED

Array 1 Host

Array 1 Error

Array 2 Host

Array 2 Error

Array 1 Array 2

Power

Connector

Main AC

Switch

Drive Drawers

Reset switch for buzzer

alarm and overheating

Drive Power Switch

Power and HD

access LED

Temperature LED

Fan LED

1 2 3 4 5 6 7

Commentaires sur ces manuels

Pas de commentaire

Addonics RT5835HEU3 Guide de l'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Réseaux de disques Addonics RT5835HEU3